Side Panel Program

Our COM Side Panel Program is designed for custom quality and simplicity. It features nine pleat styles. The program includes 2-width and 3-width pairs. Yardage and pricing are all prefigured. Pricing includes labor, lining, and pins with 1 3/4” double side hems, 4” double bottom hems, and 4” overlaps. Kirsch and six other specialty Drapery Hardware lines are available with your order.

Pricing

Order Form

Order Form Checklist

1. Complete the Customer Information section of the order form. 

  • Check the “Estimate Only” or “Place as Order” box.

2. Complete the Fabric Information section.

  • Contrast Fabric: Applies to Tab or Band, Buttons, Trim & Trim Placement.

3. Complete Lining, Interlining & Folding section.

  • Fan Fold: Typically For Pleated Styles
  • Flat Fold: Typically For Non-Pleated Styles

4. Circle Your Heading Style choice.

5. Complete the Drapery Details section by filling in each column. Indicate 2 Width or 3 Width.

6. Optional Hardware Packages if desired.

7. Complete the Shipping Charges section by using the codes and pricing found on page 10.

8. Complete the Retail Shipping Column by adding A+B+C together for Retail Grand Total. Divide by 2 for the Wholesale Grand Total.

Email to receiving@myltd.com or fax to 1-800-800-7162.

Panel Details

  • 2-width and 3-width pairs available.
  • Pricing includes labor, lining, and pins (rings not sewn on).
  • 1 3/4” double side hems, 4” double bottom hems, 4” overlaps.
  • Made with white lining unless ivory is specified.
  • Interlining and trim options are available at an extra charge.
  • Fabrics requiring up-charges:
    • 20% Crinkle/Broomstick, Open Weave, Suede, Velvet
  • Free delivery to customers in our delivery area. For other customers, please include the Flat Rate Shipping charge. See Shipping Information on the website.

Panels will include lining. Hardware package options are available.

Side Panel Style Choices

Traditional Pinch Pleat - E1101 / E1102

  • Pinch Pleat drapes consist of a three fingered pleat - tacked at bottom of 4 inch buckram.
  • Finished heading width is 20” each panel. 2 Width (2W) not stacked.
  • Finished heading width is 30” each panel. 3 Width (3W) not stacked.
  • Hardware Notes: 6 rings per panel 2W or 8 rings per panel 3W.

Inverted Box Pleat - E1157 / E1158

  • Inverted Box Pleats are flat on the face side of the drapery to create a clean boxy look.
  • Finished heading width is 20”ea.- 2W. 
  • Finished heading width is 30” ea.- 3W. 
  • Hardware Notes: 6 rings per panel 2W or 8 rings per panel 3W.

Tack Top - E1153 / E1154

  • Tack Top drapes consist of a three fingered pleat - tacked at the top of 4 inch buckram.
  • Finished heading width is 20” each panel not stacked 2W. 
  • Finished heading width is 30” not stacked 3W. 
  • Hardware Note: 6 rings per panel 2W or 8 rings per panel 3W.

Goblet Pleat - E1111 / E1112

  • Goblet Pleated drapes are tacked 4 inches down from top of drape just below buckram and the pleat above the tack puffs out creating a “goblet” shape – accented with covered buttons. If contrast buttons are desired, send 1 yd. contrast fabric. 
  • Finished heading width is 20” each panel not stacked 2W. 
  • Finished heading width is 30” ea. not stacked 3W. 
  • Hardware Notes: 6 rings per panel 2W or 8 rings per panel 3W.

Plain Tab - E7101 / E7102

  • Tab Top drapes are designed with tabs at the top that slide onto a decorative pole—this style is very simple and contemporary.
  • If contrast tabs are desired, send 1 yd. contrast fabric.
  • Finished flat width is 50” when not stacked 2W or 74” when not stacked 3W. 
  • Tabs are 1 3/4” wide x 4” long - approx. 15” stacked each panel 2W or 20” each when stacked 3W.
  • Hardware Notes: Tabs fit a 2” diameter pole.

Tab with Gathered Band - E7113 / E7114

  • Wide tabs are gathered down in width by using a decorative gathered band. 
  • If contrast bands are desired, send 1 yd. contrast fabric. 
  • Finished flat width is 50” when not stacked 2W or 74” when not stacked 3W.
  • Hardware Notes: Tabs fit a 2” diameter pole.

Cuff Top - E1191 / E1192

  • Cuffed draperies consist of four decorative folds of fabric stitched down 6 inches on the front of the header. They may be left flat for a clean look or pulled apart for a gathered appearance (see inset picture).
  • Finished flat width per panel is 50” not stacked 2W or 74” when not stacked 3W.
  • Hardware Notes: 6 rings 2W or 8 rings 3W per panel.

Soft Top Flair Pleat - E1193 / E1194

  • A Soft Top Flair drape consists of a two prong pleat tacked at the top with soft 6 inch spacing between pleats – no buckram.
  • Finished heading width per panel is 20” 2W or 30” 3W when not stacked.
  • Hardware Notes: 6 rings 2W or 8 rings 3W per panel.

Diamond Smocked - E1195 / E1196

  • A diamond smocked drape is shirred with a special tape to create a diamond-shaped heading.
  • Approximate width per panel is 20” 2W or 30” 3W flat.
  • Hardware Notes: 6 rings 2W or 8 rings 3W per panel.

Note: Buttons, bands, and tabs in face fabric is standard.

cs-cart license, cs-cart addons, cs-cart multivendor